Egronomic and durable design for cleaning and storing your favourite MPF brushes. The base is made out of silicon which makes it very easy to clean and dry. Kit Items: Item No. 111-0000-Brush PoolItem No. 111-0001-Replacement BowlItem No. 111-0002-Replacement Sponge

Read more less

Premium Kolinsky sable brush tips. New plastic handle and ferrule. Tip de-humidifying system (internal ball bearings.)

Read more less

Premium Kolinsky sable brush tips. New plastic handle and ferrule. Tip de-humidifying system (internal ball bearings.)MPF Classic Kolinsky Brush Kit contains sizes: #2, #4, #6, #8Items Kit: (105-0002) DPMPF19 (105-0004)DPMPF20 (105-0006) DPMPF21 (105-0008) DPMPF22

Read more less

Due to the decrease of High-Quality Kolinsky, our solution was to to incorporate a Felt Nib insert within the hair bundle. This absorbent Felt Nib when wet withholds water and due to the fact that the hair bundle is wrapped around the felt nib creates a constant humid enviroment. This keeps the hair in a constant humid state.

Read more less

Optimum™ Spring Ceramic Brushes Kits contain all 3 Brush Tip sizes (#4, #6, #8), plus the handle of your choice.

Read more less

Designed as tabletop models, these compact high-temperature furnaces have a variety of advantages. The first-class workmanship using high-quality materials, combined with ease of operation, make these furnaces all-rounders in research and the laboratory. These high-temperature furnaces are also perfectly suited for the sintering of technical ceramics, such as zirconium oxide dental bridges. Standard Equipment Tmax 1600 °C, 1750 °C, or 1800 °C Recommended working temperature 1750 °C (for models LHT ../18), increased wear and tear must be expected in case of working at higher temperatures High-quality heating elements made of molybdenum disilicide offer very good protection against chemical interaction between charge and heating elements Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP) Adjustable air inlet opening Exhaust air opening in the roof Thermocouple type B or type S (LHT ../17 D) Controller with touch operation P580 (50 programs with each 40 segments) Defined application within the constraints of the operating instructions NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Read more less

The POLYWAX PLASTIC GASKETS can be used for for mouthguards, nightguards and model duplication. Transparent.  Thickness: 2.0 mm

Read more less

AccuFab L4D LCD Screen replacement

Read more less

The MT3 wet trimmer is impressive due to its exceptionally powerful motor. With the MT3 Renfert provides high-performance trimming at a low price.   Advantages Quick change of the trimmer table angle using the practical tipping mechanism (90°/ 98°). Safety: when the front door is opened a safety switch stops the motor and water. Uniform coverage by the optimally positioned spray tube prevents clogging of the trimmer disc. Details Optimum view of the model due to a 10° inclination of the unit. Easy guidance of the plaster model with the aid of slotted angle lines on the trimmer table.

Read more less

Hand sleeves for the Renfert Basic Master, Classic, and Quattro. Set of 2. Not compatible with the Basic Eco models.

Read more less

DOWNLOAD OUR ZIRCONIA INSTRUCTIONS FOR USE [CLICK HERE] DOWNLOAD OUR DENTAL PLUS ZIRCONIA GUIDE [CLICK HERE] Our Zirconia discs offer superior chroma for a natural look and efficient production speed. The disc's cervical area has intense chroma, which reduces towards the incisal area. As an additional feature, the top third of the disc is constructed with an incisal blue gray effect to reduce white L* value and present the tooth's natural blueish grayish translucency. This tailored dental solution is designed to give you the exact shade after milling and sintering are complete. With Dental Plus Zirconia, you can be sure that your results will look realistic and professional. Flexural Strength >805MPa on Incisal>1105 MPa on Cervical Translucency 52% Incisal48% Cervical Indications Single Crowns to 6-unit Bridges  

Read more less

Range for efficient processing of ceramic and metal alloy restorations. Different shapes allow you to work on all surfaces of your restorations.  

Read more less

The 1358 kit contains instruments for processing zirconia restorations. Diamond stones provide the coarse removal, Zirconflex stones form the basis for fine finishing and Swivel diamond polisher polish sintered zirconia restorations to perfection.  

Read more less

The kit contains diamond grinding stones in different shapes, which have been developed for the quick preparation of all surfaces of restorations made of ceramics. Diamond grit size and bond percentage are perfectly matched to each other, providing an optimal balance between preparation efficiency and stone durability.  

Read more less

With the JOTA ZIR Gloss Kit, we offer a precisely coordinated system that covers all working steps on zirconia restorations - from separating the restoration from the blank to high-gloss polishing. The super-slim tungsten carbide cutter with an extended shaft is perfect for separating without the risk of damage caused by tearing or jamming. The specially developed two-stage diamond polishers are complemented by the proven JOTA Zirconflex stone, which is used for dry processing of zirconium oxide.  

Read more less

The kit consists of instruments specially designed for processing and polishing titanium restorations and titanium abutments. The blue color of the instruments makes it easy to distinguish them from other metal polishes. Your restorations can be polished to a high gloss with ease.  

Read more less

USING THE TI-BONDING SYSTEM [CLICK HERE] What is the Ti-Bonding System? Ti Bonder is specially formulated to be used for applying over Titanium frameworks and Zirconia. The Ti Bonder considerably reduces the oxide formation during firing and improves the bonding when other materials such as ceramic or composites are added. It can be used in combination with Ti Opaque Mask Paste and Ceramic Spheres to create a rougher surface for improved mechanical retention.   Products Needed: 5g Ceramic Spheres 5g Ti Bonder 3g Ti Opaque Mask Paste 5 ml Bonder Liquid Cement  

Read more less

Aoralscan 3 is lightweight and features fast, intelligent and accurate scan. Dentists can acquire digital impressions of patients in real time. It also supports intuitive dentist-patient communication and effective clinic-lab collaboration, empowering a highly efficient digital chairside solution. Aoralscan 3 has not only been favored by the iF board, but has also gained a group of loyal fans worldwide. The Aoralscan 3 is ergonomically designed, lightweight and exceptional, only about 240g, and can be gripped with comfort as dentists prefer. The Aoralscan 3 intraoral scanner won the iF Design Award, representing the high recognition of the international design community, and once again proving the strong strength of SHINING3D in the field of design and product innovation. In the future, SHINING3D will always adhere to research and innovation, focus on improving product design and user experience, bring better products and services, and remain committed to driving further changes in intelligent manufacturing worldwide.  

Read more less

Mixing Wells 4 Spaces Palletes

Read more less

KIT 1452 contains all the necessary instruments for contouring, finishing, and polishing zirconium-reinforced lithium silicate restorations in the laboratory. Diamond instruments are used to finish supra-contact points, characterize occlusal and vestibular surfaces, and separate the crowns from the block. The green Diamond Stone is intended for rough grinding of the bonding contacts. In addition, the kit contains prepolishers and high-gloss polishers that provide high-gloss results and can be used without polishing paste. Items included:859LF.HP.018SD722F.HP.220 (DPJT722)ZIR9868M.HP.140 (DPJT9868M)ZIR9868F.HP.140 (DPJT9868F)9802G.HP.1709802F.HP.170  

Read more less

› Finest grinding / polishing of filling materials and all composite-filling-materials.ROTATION SPEED› 15‘000 - 20‘000 rpm› max. 30‘000 rpm

Read more less

Two-stage diamond polishing system for material removal, smoothing and polishing of sintered zirconium oxide.Smoothing and pre-polishing / light green: high-gloss polishing.

Read more less

Two-stage diamond polishing system for material removal, smoothing and polishing of sintered zirconium oxide. Smoothing and pre-polishing / light green: high-gloss polishing.  

Read more less

One-step diamond polisher for smoothing and polishing of composite, nano- / hybrideceramic and acrylics.

Read more less

Diamond Bur HP Electroplated CC18 wholesale, Round Cylinder head shape, head size is 1.8mm, Green ring color, 534-Coarse grit coarse. Check for more detail and wholesale price. Head Diameter (1/10 mm): 18 Cutting Length (mm): 15 Head Shape: Round Cylinder Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 534-Coarse Color: Green

Read more less

The Multi Unit Titanium Base for Internal Hexagon Dental Implant is a hexagon size 2.42mm and standard platform length of 4.5mm, constructed from titanium  grade 5 (TI-6AL-4V ELI) material. The Multi Unit Titanium Base for Internal Hexagon Dental Implant is an excellent choice for those seeking a secure and long-lasting solution to replace missing teeth. This system provides the perfect foundation for creating natural looking, strong and durable restoration for smile aesthetics.# Height: 4.5mm# Diameter: Ø4.9mm# Material: Titanium grade 5 (TI-6AL-4V ELI)# Certificates: CE Approved, ISO (9001:2008), MEDICAL ISO (13485:2003), FDA Approved# Country of Manufacture: Israel# Compatible With: Only GDT Multi Unit System Abutments - Angulated And StraightGDT Ti-Base CAD/CAM technology now represents the most innovative approach in the fixed prostheses development and progress over conventional dentistry, allowing precise design and higher quality restorations.

Read more less