Diamond Bur HP Electroplated FK33 wholesale, Inverted Cone head shape, head size is 3.3mm, Red ring color, 514-Fine grit coarse. Head Diameter (1/10 mm): 33 Cutting Length (mm): 1.2 Head Shape: Inverted Cone Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 514-Fine Color: Red

Read more less

When using coarse-grained diamonds, it is important to take the necessary precautions to ensure sufficient cooling and minimal application force. Excessive heat generation can lead to premature tool wear and accelerated product degradation. To reduce the risk of these issues, diamond tools must be operated at higher speeds, lower grinding forces, and with suitable coolants or lubricants. Long life diamond burs Quality control tested High precision with efficient cutting Efficient Cutting. It is defined as the rotary grinding instruments for hard tissues such as tooth and bones. It can also be used for grinding metal, plastic, porcelain and other hard materials.

Read more less

Superior cutting ability. Electroplating process is strictly controlled by laser measurement inspection. Cutting and strength test for each lot is performed.5/pkHead Diameter: 2.2Head Length: 11.2Equivalent: 850L-022Overall Working length: 23.7

Read more less

Diamond Bur HP Electroplated SG50 wholesaleFlame/Football head shape, head size is 5mm, Black ring color, 544-Super Coarse grit coarse. Head Diameter (1/10 mm): 50 Cutting Length (mm): 12 Head Shape: Flame/Football Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 544-Super Coarse Color: Black

Read more less

Diamond Bur HP Electroplated CC18 wholesale, Round Cylinder head shape, head size is 1.8mm, Green ring color, 534-Coarse grit coarse. Check for more detail and wholesale price. Head Diameter (1/10 mm): 18 Cutting Length (mm): 15 Head Shape: Round Cylinder Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 534-Coarse Color: Green

Read more less

Diamond polisher, which can be optionally used as a preliminary polishing stage prior to using JOTA EASY to produce even more professional results.JOTA PROFESSIONAL BaseStep 1 - Green: contouring and smoothing 7‘000 – 10‘000 rpmJOTA EASYStep 2 - Grey: high-lustre polishing 3’000 – 8‘000 rpmItems: DPJT9828-JOTA PROFESSIONAL Base DPJT9832-JOTA EASY DPJT9833-JOTA EASY  

Read more less

Dentristy Zirconia diamonds with special diamond grit and optimized bond are designed for working on highly sensitive zirconia. By using mono-crystalline diamond grit, the instruments are less aggressive, and they ensure a low-temperature rise during preparation and keep the roughness of the prepared surfaces low. This significantly reduces the risk of micro-cracks in the zirconia.With the polishing system, we offer a solution that polishes corrections of zirconia restorations to a high gloss in a very short time. Smaller modifications to inlays/onlays or crowns often take place on the chairside, so efficient and effective polishing solutions are essential.Items: DPJT850 DPJT833 DPJT833F DPJT801 DPJT838L DPJT9861M DPJT9862M DPJT9861F DPJT9862F DPJT662   

Read more less

Kit 1427 contains carbide burs for roughing and finishing the base of acrylic dentures and assist in finishing undercuts and detailing acrylic teeth.  

Read more less

The Dentur Polish Kit 1877 is a practical polishing system for all types of acrylic dentures: easy to use, fast and with excellent results. The kit consists of a 3-step polishing system and complementary brushes. For best results, the Kit 1877 should be combined with Jota‘s high gloss emulsion with article number 1550.Includes the following burs:9572G HP9574G HP9572M HP9574M HP9572F HP9574F HP1170 HP1164 HP

Read more less

Diamond Bur HP Electroplated MB12 wholesale, Taper head shape, head size is 1.2mm, Blue ring color, 524-Medium grit coarse. Head Diameter (1/10 mm): 12 Cutting Length (mm): 6 Head Shape: Taper Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 524-Medium Color: Blue

Read more less

Diamond Bur HP Electroplated MB16 wholesale, Taper head shape, head size is 1.6mm, Blue ring color, 524-Medium grit coarse. Head Diameter (1/10 mm): 16 Cutting Length (mm): 6 Head Shape: Taper Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 524-Medium Color: Blue

Read more less

Diamond Bur HP Electroplated FC18 wholesale,Round Cylinder head shape, head size is 1.8mm, Red ring color, 514-Fine grit coarse. Head Diameter (1/10 mm): 18 Cutting Length (mm): 15 Head Shape: Round Cylinder Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 514-Fine Color: Red

Read more less

Diamond Bur HP Electroplated MR23 wholesale,  Flame/Football head shape, head size is 2.3mm, Blue ring color, 524-Medium grit coarse. Head Diameter (1/10 mm): 23 Cutting Length (mm): 5 Head Shape: Flame/Football Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 524-Medium Color: Blue

Read more less

Diamond Bur HP Electroplated FM27 wholesale, Needle head shape, head size is 2.7mm, Red ring color, 514-Fine grit coarse. Head Diameter (1/10 mm): 27 Cutting Length (mm): 15 Head Shape: Needle Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 514-Fine Color: Red

Read more less

Diamond Bur HP Electroplated MB40 wholesale,Taper head shape, head size is 4mm, Blue ring color, 524-Medium grit coarse. Head Diameter (1/10 mm): 40 Cutting Length (mm): 11 Head Shape: Taper Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 524-Medium Color: Blue

Read more less

› The use of coarse-grained diamonds (ISO 534, 544 and 554) can lead to increased heat generation. When using these products, } special care should therefore be taken to ensure sufficient cooling and minimal application force.› Instruments from ISO size 031 should be used with additional cooling (water spray)

Read more less

Coarse-grained diamonds offer many advantages compared to their finer counterparts, but the increased heat generation they cause must be taken into consideration when using them. It is important that instruments used with these products have adequate cooling (e.g. a water spray) and that application force is limited to avoid further heating.

Read more less

Coarse-grained diamonds offer many advantages compared to their finer counterparts, but the increased heat generation they cause must be taken into consideration when using them. It is important that instruments used with these products have adequate cooling (e.g. a water spray) and that application force is limited to avoid further heating.

Read more less

Coarse-grained diamonds offer many advantages compared to their finer counterparts, but the increased heat generation they cause must be taken into consideration when using them. It is important that instruments used with these products have adequate cooling (e.g. a water spray) and that application force is limited to avoid further heating.SHANK HPL: 0,20 mmØ 220Ref: 806 104 358 514  

Read more less

ZIRCONIUM OXIDE DIAMOND POLISHERS ZIR GLOSSTwo-stage diamond polishing system for material removal, smoothing and polishing of sintered zirconium oxide.Smoothing and pre-polishing / light green: high-gloss polishing.  

Read more less

Two-stage diamond polishing system for material removal, smoothing and polishing of sintered zirconium oxide. Smoothing and pre-polishing / light green: high-gloss polishing.  

Read more less

› Two-step diamond polishing system for material removal, smoothing and polishing of zirconium oxide.› Dark green: smoothing and pre-polishing

Read more less

› Two-step diamond polishing system for material removal, smoothing and polishing of zirconium oxide.› Dark green: smoothing and pre-polishing

Read more less

Diamond polisher, which can be optionally used as a preliminary polishing stage prior to using JOTA EASY to produce even more professional results.contouring and smoothing 7‘000 – 10‘000 rpm

Read more less

One-step diamond polisher for smoothing and polishing of composite, nano- / hybrideceramic and acrylics.

Read more less

Diamond polisher, which can be optionally used as a preliminary polishing stage prior to using JOTA EASY to produce even more professional results.JOTA EASYGrey: high-lustre polishing 3’000 – 8‘000 rpm

Read more less

Diamond polisher, which can be optionally used as a preliminary polishing stage prior to using JOTA EASY to produce even more professional results.JOTA EASYGrey: high-lustre polishing 3’000 – 8‘000 rpm

Read more less

ZIRCONIUM OXIDE DIAMOND POLISHERS ZIR GLOSS Two-stage diamond polishing system for material removal, smoothing and polishing of sintered zirconium oxide.Smoothing and pre-polishing / light green: high-gloss polishing.  

Read more less

Two-stage diamond polishing system for material removal, smoothing and polishing of sintered zirconium oxide.Smoothing and pre-polishing / light green: high-gloss polishing.

Read more less

Two-stage diamond polishing system for material removal, smoothing and polishing of sintered zirconium oxide. Smoothing and pre-polishing / light green: high-gloss polishing.  

Read more less

› Two-step diamond polishing system for material removal, smoothing and polishing of zirconium oxide.› light green: gloss polishing.

Read more less

› Two-step diamond polishing system for material removal, smoothing and polishing of zirconium oxide.› light green: gloss polishing.

Read more less

The kit contains diamond grinding stones in different shapes, which have been developed for the quick preparation of all surfaces of restorations made of ceramics. Diamond grit size and bond percentage are perfectly matched to each other, providing an optimal balance between preparation efficiency and stone durability.  

Read more less

The two-stage diamond polishing system is designed to provide an efficient and gentle approach to removing, smoothing and polishing sintered zirconium oxide. The first stage utilizes dark green diamonds for smoothing and pre-polishing; the second stage uses lighter green diamonds for high-gloss polishing.

Read more less

 The two-stage diamond polishing system is designed to provide an efficient and gentle approach to removing, smoothing and polishing sintered zirconium oxide. The first stage utilizes dark green diamonds for smoothing and pre-polishing; the second stage uses lighter green diamonds for high-gloss polishing.  

Read more less

Modern technologies in the manufacture of removable dentures using computer design require appropriate techniques for finishing and polishing. Digital Denture Kit 1888 allows to process, separate, and polish of the CAD-CAM and 3D manufactured dentures made of reinforced PMMA, PMMA, composite, and bis-acryl.  

Read more less