G-Tools Polishing Kit
G-tools Polishing Kit (DPJT1960)
LEARN MORE ABOUT G-CAM [CLICK HERE] The G-CAM laboratory polishing kit for an optimum finish.It consists of three steps: grinding, polishing, and brightening.
Diamond instrument HP (DPJT921) X 1 UNIT
Coarse-grained diamonds offer many advantages compared to their finer counterparts, but the increased heat generation they cause must be taken into consideration when using them. It is important that instruments used with these products have adequate cooling (e.g. a water spray) and that application force is limited to avoid further heating.SHANK HPL: 0,20 mmØ 220Ref: 806 104 358 514
Polishing Brush HP (DPJT1121) X 5 units
Goat hair soft - for polishing denture acrylics, composites & precious metal alloys with polishing paste.
Polishing Bur (DPJT9107M) X10 Units
Silicone burs for smoothing and polishing the surface of the G-CAM
Polishing Bur (DPJT9108M) x 10 Units
Silicone burs for smoothing and polishing the surface of the G-CAM
Carbide Cutter x 1 Unit (DPJT251) X 1 Unit
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
Polishing Bur for G-cam(DPJT1163F) X 5 Units
Surface sealing and mirror polishing for G-cam
Polishing Bur for G-cam (DPJT1171F) x 1 Unit
Surface sealing and mirror polishing for G-cam
Carbide cutter X1 Unit (DPJT73MF)X 1 UNIT
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
Carbide cutter X1 Unit (DPJT77MF) X 1 UNIT
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
Carbide cutter X1 Unit (DPJT488F) X 1 UNIT
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
Carbide Cutter x 1 Unit (DPJT251F)
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
Carbide Burs X 5 Units (DPJT23SR)
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
