Green State Refining
Diamond instrument HP (DPJT863) X 5 UNITS
Coarse-grained diamonds offer many advantages compared to their finer counterparts, but the increased heat generation they cause must be taken into consideration when using them. It is important that instruments used with these products have adequate cooling (e.g. a water spray) and that application force is limited to avoid further heating.
Steel instrument HP (DPJT515) X 2 UNIT
Tungsten carbide instruments are essential for preparing accurate and precise acrylic and vacuum-formed templates. These tools are designed to provide a clean, consistent cut that helps minimize time and effort when making templates for prostheses. They feature sharp edges that enable them to quickly and easily penetrate plastic materials without fear of chipping or cracking the material.
Pre-sintered Zirconia Polisher HP (DPJT9972) X 5 UNIT
PRE-SINTERPOL is an innovative solution for the esthetics of pre-sintered zirconia. It does not change the color, while achieving a smooth and glossy surface finish. The combination of M-polishers and F-polishers provides an effective polishing result. The dark grey M-polishers remove connectors, thin margins, and make the surface smoother. The light grey F-polishers polish the surface of pre-sintered zirconia to give it a glossy finish. This combination of polishers is ideal for achieving an esthetic result with pre-sintered zirconia.
Diamond instrument HP (DPJT882) X 5 Units
Coarse-grained diamonds offer many advantages compared to their finer counterparts, but the increased heat generation they cause must be taken into consideration when using them. It is important that instruments used with these products have adequate cooling (e.g. a water spray) and that application force is limited to avoid further heating.
Green State Refining (DPJT1936)
Defects such as cracks and microchips formed due to the manufacturing process or characterization of zirconia and Sintron can not be eliminated by subsequent sintering. We, therefore, recommend greenor white-stage polishing. The 1936 GREEN STATE REFINING KIT contains instruments for cutting from the block or blank, grinding the contact points, texturing the surfaces, and PRE-SINTERPOL polishers for green or white stage polishing.
Polisher Swivel GREY HP (DPJT9840) X 2 Units
Defects such as cracks and microchips formed due to the manufacturing process or characterization of zirconia and Sintron can not be eliminated by subsequent sintering. We, therefore, recommend greenor white-stage polishing. The 1936 GREEN STATE REFINING KIT contains instruments for cutting from the block or blank, grinding the contact points, texturing the surfaces, and PRE-SINTERPOL polishers for green or white stage polishing.
Carbide instrument HPL C31RL (DPJT31C)
Defects such as cracks and microchips formed due to the manufacturing process or characterization of zirconia and Sintron can not be eliminated by subsequent sintering. We, therefore, recommend greenor white-stage polishing. The 1936 GREEN STATE REFINING KIT contains instruments for cutting from the block or blank, grinding the contact points, texturing the surfaces, and PRE-SINTERPOL polishers for green or white stage polishing.