Lab Materials
-
MPF Revolution Replacement Tips DPMPF48 (200-1004) X 1 Unit
Replaceable premium quality tips for all your Revolution tools.
-
MPF Revolution Replacement Tips DPMPF47 (200-1002) X 1 Unit
Replaceable premium quality tips for all your Revolution tools.
-
Abrasive Diamond Stone HP (DPJT716) X 1 Unit
Specially developed for safe dry preparation of Zirconia.ROTATION SPEED› 15‘000 – 20‘000 rpm- max. 30‘000 rpmProduct Information: Application:all-ceramic Figure:wheel Accessories: BS23 HP Material:Diamond Grain/color code: red (fine)
-
Brush Pool Complete (DPMPF31)
Egronomic and durable design for cleaning and storing your favourite MPF brushes. The base is made out of silicon which makes it very easy to clean and dry. Kit Items: Item No. 111-0000-Brush PoolItem No. 111-0001-Replacement BowlItem No. 111-0002-Replacement Sponge
-
MPF Classic Kolinsky Ceramic Brush, Size 6 (DPMPF21)
Premium Kolinsky sable brush tips. New plastic handle and ferrule. Tip de-humidifying system (internal ball bearings.)
-
MPF Classic Brush Complete Kit (DPMPF18)
Premium Kolinsky sable brush tips. New plastic handle and ferrule. Tip de-humidifying system (internal ball bearings.)MPF Classic Kolinsky Brush Kit contains sizes: #2, #4, #6, #8Items Kit: (105-0002) DPMPF19 (105-0004)DPMPF20 (105-0006) DPMPF21 (105-0008) DPMPF22
-
MPF Hybrid Tip #2 (DPMPF14) X 1 Unit
Due to the decrease of High-Quality Kolinsky, our solution was to to incorporate a Felt Nib insert within the hair bundle. This absorbent Felt Nib when wet withholds water and due to the fact that the hair bundle is wrapped around the felt nib creates a constant humid enviroment. This keeps the hair in a constant humid state.
-
Optimum™ Lady Spring Brush, Size 6 - Purple (DPMPF11)
Optimum™ Spring Ceramic Brushes Kits contain all 3 Brush Tip sizes (#4, #6, #8), plus the handle of your choice.
-
Door gasket FOR MT3/MT3 Trimmer pro (900036511)
The MT3 wet trimmer is impressive due to its exceptionally powerful motor. With the MT3 Renfert provides high-performance trimming at a low price. Advantages Quick change of the trimmer table angle using the practical tipping mechanism (90°/ 98°). Safety: when the front door is opened a safety switch stops the motor and water. Uniform coverage by the optimally positioned spray tube prevents clogging of the trimmer disc. Details Optimum view of the model due to a 10° inclination of the unit. Easy guidance of the plaster model with the aid of slotted angle lines on the trimmer table.
-
KIWI LINE KIT (DPJT1377)
Range for efficient processing of ceramic and metal alloy restorations. Different shapes allow you to work on all surfaces of your restorations.
-
ZIRCONPROFI KIT (DPJT1358)
The 1358 kit contains instruments for processing zirconia restorations. Diamond stones provide the coarse removal, Zirconflex stones form the basis for fine finishing and Swivel diamond polisher polish sintered zirconia restorations to perfection.
-
DIAMOND STONE (DPJT1320)
The kit contains diamond grinding stones in different shapes, which have been developed for the quick preparation of all surfaces of restorations made of ceramics. Diamond grit size and bond percentage are perfectly matched to each other, providing an optimal balance between preparation efficiency and stone durability.
-
ZIR-PREP KIT (DPJT1460)
The JOTA Zir-Prep diamonds with special diamond grit and optimized bond are designed for working on highly sensitive zirconia. By using mono-crystalline diamond grit, the instruments are less aggressive, and they ensure a low-temperature rise during preparation and keep the roughness of the prepared surfaces low. This significantly reducesthe risk of micro-cracks in the zirconia.
-
KIT 1832 - B.E.F PROTOTYPE (DPJT1832)
This kit was developed together with opinion leader Dr. Milko Villarroel. By following three simple steps, you can achieve the desired results in PMMA or Bis-Acrylic. A fine-cut tungsten carbide instrument removes more significant excesses and designs a proper margin fit. The super-flexible diamond disc is coated on one side and used to separate and customize elements. Universal polisher and impregnated brush are used for pre-polishing. A soft goat hairbrush and a fine fabric disc together with polishing paste provide the perfect polishing.
-
METAL FINISHING KIT (DPJT1920)
The 1920 kit contains instruments required for the rough and fine processing of non-precious metal restorations. In addition to tungsten carbide burs, the kit includes a grinding stone for metals that enables pre-processing. A 2-stage polishing system in wheel form is added for polishing larger surfaces, and flame-shaped polishing heads support the polishing of occlusal surfaces and smaller surfaces.
-
ALL CERAMIC PROFI KIT (DPJT1413)
A universal kit for working with all types of ceramics. Specially selected instruments to work with all ceramics and composites: detaching, grinding, and high-gloss polishing. Experience significant relief and time-saving in your daily work with this set. Detailed instructions on the sequence of instruments for different types of ceramics can be found via videos on our YouTube channel.
-
POLISH FOR DENTURE KIT 1401 (DPJT1401)
The Denture Polishing Kit offers comprehensive instruments for systematic and easy polishing acrylic dentures and denture teeth. For best results, Kit 1401 should be combined with Jota‘s High Gloss Emulsion, item number 1550.
-
ZIR GLOSS KIT (DPJT1434)
With the JOTA ZIR Gloss Kit, we offer a precisely coordinated system that covers all working steps on zirconia restorations - from separating the restoration from the blank to high-gloss polishing. The super-slim tungsten carbide cutter with an extended shaft is perfect for separating without the risk of damage caused by tearing or jamming. The specially developed two-stage diamond polishers are complemented by the proven JOTA Zirconflex stone, which is used for dry processing of zirconium oxide.
-
BLUEVORTEX Kit (DPJT11916)
The kit consists of instruments specially designed for processing and polishing titanium restorations and titanium abutments. The blue color of the instruments makes it easy to distinguish them from other metal polishes. Your restorations can be polished to a high gloss with ease.
-
LS-ZIR Polishing Kit (DPJT1452)
KIT 1452 contains all the necessary instruments for contouring, finishing, and polishing zirconium-reinforced lithium silicate restorations in the laboratory. Diamond instruments are used to finish supra-contact points, characterize occlusal and vestibular surfaces, and separate the crowns from the block. The green Diamond Stone is intended for rough grinding of the bonding contacts. In addition, the kit contains prepolishers and high-gloss polishers that provide high-gloss results and can be used without polishing paste. Items included:859LF.HP.018SD722F.HP.220 (DPJT722)ZIR9868M.HP.140 (DPJT9868M)ZIR9868F.HP.140 (DPJT9868F)9802G.HP.1709802F.HP.170
-
Diamond Polisher L-Green HP (DPJT9866F)
Two-stage diamond polishing system for material removal, smoothing and polishing of sintered zirconium oxide.Smoothing and pre-polishing / light green: high-gloss polishing.
-
Diamond Polisher L-Green HP (DPJT9867F)
Two-stage diamond polishing system for material removal, smoothing and polishing of sintered zirconium oxide. Smoothing and pre-polishing / light green: high-gloss polishing.
-
Diamond Polisher Grey HP (DPJT9835)
One-step diamond polisher for smoothing and polishing of composite, nano- / hybrideceramic and acrylics.
-
Dental Diamond High Speed Bur (DPCH37)X 10 Units
Diamond Bur HP Electroplated CC18 wholesale, Round Cylinder head shape, head size is 1.8mm, Green ring color, 534-Coarse grit coarse. Check for more detail and wholesale price. Head Diameter (1/10 mm): 18 Cutting Length (mm): 15 Head Shape: Round Cylinder Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 534-Coarse Color: Green
-
Abrasive Diamond Stone HP (DPJT638)X2 UNITS
› Finest grinding / polishing of filling materials and all composite-filling-materials.ROTATION SPEED› 15‘000 - 20‘000 rpm› max. 30‘000 rpm
-
MPF Spider Klip (DPMPF30)
The Master Klip Tweezers are a spring activated hand tool that has stainless steel pointed holders that are activated and deactivated when the base of the tweezer is pressed.These Tweezers are very useful for holding onto delicate prosthesis such as crown and veneers when staining or creating additions.
-
MPF Hybrid Tip #8 (DPMPF17) X 1 Unit
Due to the decrease of High-Quality Kolinsky, our solution was to to incorporate a Felt Nib insert within the hair bundle. This absorbent Felt Nib when wet withholds water and due to the fact that the hair bundle is wrapped around the felt nib creates a constant humid enviroment. This keeps the hair in a constant humid state.
-
MPF Hybrid Tip #6 (DPMPF16) X 1 Unit
Due to the decrease of High-Quality Kolinsky, our solution was to to incorporate a Felt Nib insert within the hair bundle. This absorbent Felt Nib when wet withholds water and due to the fact that the hair bundle is wrapped around the felt nib creates a constant humid enviroment. This keeps the hair in a constant humid state.
-
Optimum™ Instrument Bench Stand (DPMPF13)
Keeps all your brushes and tools in one place. Easy Grab-N-Go design, durable and elegant.
-
Optimum™ Lady Spring Brush, Size 8 - Midnight Blue (DPMPF12)
Optimum™ Spring Ceramic Brushes Kits contain all 3 Brush Tip sizes (#4, #6, #8), plus the handle of your choice.
-
Optimum™ Spring Ceramic Brush, Size 8, Midnight Blue (DPMPF09)
Spring activated tip. Perfectly balanced.Replaceable premium Kolinsky sable brush tips. Integrated thorn allows to release pinned die-segments from model base.
-
Bowl Shape (DPCH29) X10 Units
Miniature Polishing Brush, with head size 5mm, material is Crimped steel, Pen head shape. Ideal for polishing surface of all types of material soft and hard. SPECIFICATIONS Head Diameter (1/10 mm) 50 Head Shape Pen Material Crimped steel Shank Diameter(mm) 2.35 Shank Type Straight Handpiece
-
STEEL HP (DPJT301) X5 Units
› These instruments should be conditioned using a rust protection spray to avoid the formation of black spots / margins or oxidation areas during preparation of non-stainless steel instruments in an autoclae / steam steriliser.
-
-
LIGHT 1 - Dental Worklight (Pre-Order)
Outstanding surface brightness - glare-free! LIGHT 1 is designed to meet the complex lighting requirements of everyday laboratory work. LIGHT 1 is equipped with innovative optical technology and provides unprecedented illumination of the work area. See more, work better. Every detail and every facet of dental work becomes visible. A dedicated ray tracing technology provides uniform light distribution, high average illuminance and brilliant color and surface reproduction. Advantages Maximum precision and clear visualization of the finest color nuances thanks to outstanding color rendering quality (CRI of 97 with extended color matching of 14 colors). Uniform surface brightness with rectangular illumination (adapted to dental workbench) thanks to high work area luminance with high lumen value. Brilliant surface reproduction of dental objects thanks to homogeneous light distribution and high illuminance levels. Details The special optical technology for uniform, glare-free illumination ensures fatigue-free, concentrated work. Optimum perspective viewing and display of surface textures thanks to a well-balanced combination of diffuse and directional light. Light modeling with easy-to-use modes for adapting illumination to different requirements (e. g. daylight scenario, blue light elimination). Comfortable and healthy working environment with 100 % flicker-free light.
-
ZIRCONFLEX KIT (DPJT1322)
The JOTA Zirconflex Kit offers the optimal solution for processing all surfaces of zirconium oxide. No water cooling is required, the heat build-up still remains minimal and a material-damaging phase transition on the zirconium oxide can be safely avoided. At the same time, the material properties are retained and the risk of microcracks is reduced to a minimum.
