Quick Order
-
MPF Classic Kolinsky Ceramic Brush, Size 6 (DPMPF21)
Premium Kolinsky sable brush tips. New plastic handle and ferrule. Tip de-humidifying system (internal ball bearings.)
$37.57 $28.18
-
MPF Classic Brush Complete Kit (DPMPF18)
Premium Kolinsky sable brush tips. New plastic handle and ferrule. Tip de-humidifying system (internal ball bearings.)MPF Classic Kolinsky Brush Kit contains sizes: #2, #4, #6, #8Items Kit: (105-0002) DPMPF19 (105-0004)DPMPF20 (105-0006) DPMPF21 (105-0008) DPMPF22
$134.36 $100.77
-
MPF Hybrid Tip #2 (DPMPF14) X 1 Unit
Due to the decrease of High-Quality Kolinsky, our solution was to to incorporate a Felt Nib insert within the hair bundle. This absorbent Felt Nib when wet withholds water and due to the fact that the hair bundle is wrapped around the felt nib creates a constant humid enviroment. This keeps the hair in a constant humid state.
$26.00 $19.50
-
Optimum™ Lady Spring Brush, Size 6 - Purple (DPMPF11)
Optimum™ Spring Ceramic Brushes Kits contain all 3 Brush Tip sizes (#4, #6, #8), plus the handle of your choice.
$105.33 $79.00
-
SILENT XS
The mobile suction unit for precise touch-ups SILENT XS is a fully mobile suction unit designed for dental offices and in-house laboratories. It captures milling dust with high suction power right at the source e.g. when processing temporary restorations, splints or dentures. Cordless and battery-powered, this compact device can be moved flexibly between different locations. Thanks to its low-noise operation, it is an ideal companion for efficient and clean work, even during mobile use. Advantages Flexible – cordless and battery-powered* for maximum freedom of movement – from chairside to in-house laboratory. Simple – one-handed operation and LED lighting for an optimum view of the workpiece. Perfect for quick grinding tasks. Clean – clean working air and effective dust protection thanks to H13/HEPA filter with 99.99% collector efficiency. Bag-free.
$550.00
-
$295.14
-
Nabertherm- High-temperature sintering furnace LHT 01/17 D
Designed as tabletop models, these compact high-temperature furnaces have a variety of advantages. The first-class workmanship using high-quality materials, combined with ease of operation, make these furnaces all-rounders in research and the laboratory. These high-temperature furnaces are also perfectly suited for the sintering of technical ceramics, such as zirconium oxide dental bridges. Standard Equipment Tmax 1600 °C, 1750 °C, or 1800 °C Recommended working temperature 1750 °C (for models LHT ../18), increased wear and tear must be expected in case of working at higher temperatures High-quality heating elements made of molybdenum disilicide offer very good protection against chemical interaction between charge and heating elements Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP) Adjustable air inlet opening Exhaust air opening in the roof Thermocouple type B or type S (LHT ../17 D) Controller with touch operation P580 (50 programs with each 40 segments) Defined application within the constraints of the operating instructions NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
$10,740.00 $9,129.00
-
T5 - X1.8 DW Metal Flat Burs Long 2.0 mm X 1 Unit - DPMB49
T5 - X1.8 DW Metal Flat Burs Long 2.0 mm X 1 Unit - DPMB49
$47.52 $35.64
-
T4 - X1.8 DW Metal Flat Burs 2.0 mm X 1 Unit - DPMB48
T4 - X1.8 DW Metal Flat Burs 2.0 mm X 1 Unit - DPMB48
$47.52 $35.64
-
T11 - X1.8 DW PMMA Burs 2.5 mm Shank 6 mm X 1 Unit - DPMB44
T11 - X1.8 DW PMMA Burs 2.5 mm Shank 6 mm X 1 Unit - DPMB44
$71.94 $53.96
-
T12 - DP X1.8 DW PMMA Burs 1.0 mm Shank 6 mm X 1 Unit - DPMB43
T12 - DP X1.8 DW PMMA Burs 1.0 mm Shank 6 mm X 1 Unit - DPMB43
$34.56 $25.92
-
T1 - X1.8 DW Metal Ball Burs 3.0 mm X 1 Unit - DPMB45
T1 - X1.8 DW Metal Ball Burs 3.0 mm X 1 Unit - DPMB45
$61.45 $46.09
-
T2 - X1.8 DW Metal Ball Burs 2.0 mm X 1 Unit - DPMB46
T2 - X1.8 DW Metal Ball Burs 2.0 mm X 1 Unit - DPMB46
$61.45 $46.09
-
T3 - X1.8 DW Metal Ball Burs 1.0 mm X 1 Unit - DPMB47
T3 - X1.8 DW Metal Ball Burs 1.0 mm X 1 Unit - DPMB47
$61.45 $46.09
-
DPX PMMA Bond
DPX PMMA Bond – High-Performance Primer for PMMA, Acrylics, and Composite Resins DPX PMMA Bond is a specialized bonding primer designed to enhance adhesion between PMMA, acrylics, composites, and other resin-based materials. Formulated for superior compatibility with the DPX System light-curing process, it boosts bonding strength by up to 50%. Ideal for combining putty and flowable resins or for use in denture fabrication and repairs, DPX PMMA Bond ensures secure, long-lasting results across a wide range of dental applications. Applications: Fabrication of dentures and removable dental appliances Repair and relining of full or partial dentures and removable components Directions for Use: Prepare the retention surface Apply a thin, even layer to the targeted area Allow to dry for 30–60 seconds (no light-curing needed at this step) Apply additional resin-based materials and proceed with polymerization
$47.00
-
Acrylic polisher GREY DPJT9572M X 5 UNITS
› Grey “M” polisher: for smoothing.
$25.00 $18.75
-
Polywax Plastic Gaskets - SQUARE SHAPE PACK OF 10 (DPBK01)
The POLYWAX PLASTIC GASKETS can be used for for mouthguards, nightguards and model duplication. Transparent. Thickness: 2.0 mm
$50.00 $37.50
-
Backlight Module (For AccuFab-L4D/L4K)
AccuFab L4D LCD Screen replacement
$320.00
-
Door gasket FOR MT3/MT3 Trimmer pro (900036511)
The MT3 wet trimmer is impressive due to its exceptionally powerful motor. With the MT3 Renfert provides high-performance trimming at a low price. Advantages Quick change of the trimmer table angle using the practical tipping mechanism (90°/ 98°). Safety: when the front door is opened a safety switch stops the motor and water. Uniform coverage by the optimally positioned spray tube prevents clogging of the trimmer disc. Details Optimum view of the model due to a 10° inclination of the unit. Easy guidance of the plaster model with the aid of slotted angle lines on the trimmer table.
$20.00 $17.00
-
Hand sleevesfor sandblast-Renfert
Hand sleeves for the Renfert Basic Master, Classic, and Quattro. Set of 2. Not compatible with the Basic Eco models.
$50.70
-
Zirconia Harmony 98mm
DOWNLOAD OUR ZIRCONIA INSTRUCTIONS FOR USE [CLICK HERE] DOWNLOAD OUR DENTAL PLUS ZIRCONIA GUIDE [CLICK HERE] Our Zirconia discs offer superior chroma for a natural look and efficient production speed. The disc's cervical area has intense chroma, which reduces towards the incisal area. As an additional feature, the top third of the disc is constructed with an incisal blue gray effect to reduce white L* value and present the tooth's natural blueish grayish translucency. This tailored dental solution is designed to give you the exact shade after milling and sintering are complete. With Dental Plus Zirconia, you can be sure that your results will look realistic and professional. Flexural Strength >805MPa on Incisal>1105 MPa on Cervical Translucency 52% Incisal48% Cervical Indications Single Crowns to 6-unit Bridges
$112.50 - $148.50
-
KIWI LINE KIT (DPJT1377)
Range for efficient processing of ceramic and metal alloy restorations. Different shapes allow you to work on all surfaces of your restorations.
$100.00
-
ZIRCONPROFI KIT (DPJT1358)
The 1358 kit contains instruments for processing zirconia restorations. Diamond stones provide the coarse removal, Zirconflex stones form the basis for fine finishing and Swivel diamond polisher polish sintered zirconia restorations to perfection.
$100.00
-
DIAMOND STONE (DPJT1320)
The kit contains diamond grinding stones in different shapes, which have been developed for the quick preparation of all surfaces of restorations made of ceramics. Diamond grit size and bond percentage are perfectly matched to each other, providing an optimal balance between preparation efficiency and stone durability.
$150.00
-
DIGITAL DENTURE KIT (DPJT1888)
Modern technologies in the manufacture of removable dentures using computer design require appropriate techniques for finishing and polishing. Digital Denture Kit 1888 allows to process, separate, and polish of the CAD-CAM and 3D manufactured dentures made of reinforced PMMA, PMMA, composite, and bis-acryl.
$150.00
-
ZIR-PREP KIT (DPJT1460)
The JOTA Zir-Prep diamonds with special diamond grit and optimized bond are designed for working on highly sensitive zirconia. By using mono-crystalline diamond grit, the instruments are less aggressive, and they ensure a low-temperature rise during preparation and keep the roughness of the prepared surfaces low. This significantly reducesthe risk of micro-cracks in the zirconia.
$120.00
-
KIT 1832 - B.E.F PROTOTYPE (DPJT1832)
This kit was developed together with opinion leader Dr. Milko Villarroel. By following three simple steps, you can achieve the desired results in PMMA or Bis-Acrylic. A fine-cut tungsten carbide instrument removes more significant excesses and designs a proper margin fit. The super-flexible diamond disc is coated on one side and used to separate and customize elements. Universal polisher and impregnated brush are used for pre-polishing. A soft goat hairbrush and a fine fabric disc together with polishing paste provide the perfect polishing.
$100.00
-
METAL FINISHING KIT (DPJT1920)
The 1920 kit contains instruments required for the rough and fine processing of non-precious metal restorations. In addition to tungsten carbide burs, the kit includes a grinding stone for metals that enables pre-processing. A 2-stage polishing system in wheel form is added for polishing larger surfaces, and flame-shaped polishing heads support the polishing of occlusal surfaces and smaller surfaces.
$100.00
-
ALL CERAMIC PROFI KIT (DPJT1413)
A universal kit for working with all types of ceramics. Specially selected instruments to work with all ceramics and composites: detaching, grinding, and high-gloss polishing. Experience significant relief and time-saving in your daily work with this set. Detailed instructions on the sequence of instruments for different types of ceramics can be found via videos on our YouTube channel.
$300.00
-
POLISH FOR DENTURE KIT 1401 (DPJT1401)
The Denture Polishing Kit offers comprehensive instruments for systematic and easy polishing acrylic dentures and denture teeth. For best results, Kit 1401 should be combined with Jota‘s High Gloss Emulsion, item number 1550.
$100.00
-
ZIR GLOSS KIT (DPJT1434)
With the JOTA ZIR Gloss Kit, we offer a precisely coordinated system that covers all working steps on zirconia restorations - from separating the restoration from the blank to high-gloss polishing. The super-slim tungsten carbide cutter with an extended shaft is perfect for separating without the risk of damage caused by tearing or jamming. The specially developed two-stage diamond polishers are complemented by the proven JOTA Zirconflex stone, which is used for dry processing of zirconium oxide.
$200.00
-
BLUEVORTEX Kit (DPJT11916)
The kit consists of instruments specially designed for processing and polishing titanium restorations and titanium abutments. The blue color of the instruments makes it easy to distinguish them from other metal polishes. Your restorations can be polished to a high gloss with ease.
$100.00
-
![Ti-Bonder Kit [FULL]](//www.dentalplususa.com/cdn/shop/files/DPProductSquareImages_2.png?crop=center&height=645&v=1714684419&width=645)
![Ti-Bonder Kit [FULL]](//www.dentalplususa.com/cdn/shop/files/23.jpg?crop=center&height=645&v=1714684427&width=645)
Ti-Bonder Kit [FULL]
USING THE TI-BONDING SYSTEM [CLICK HERE] What is the Ti-Bonding System? Ti Bonder is specially formulated to be used for applying over Titanium frameworks and Zirconia. The Ti Bonder considerably reduces the oxide formation during firing and improves the bonding when other materials such as ceramic or composites are added. It can be used in combination with Ti Opaque Mask Paste and Ceramic Spheres to create a rougher surface for improved mechanical retention. Products Needed: 5g Ceramic Spheres 5g Ti Bonder 3g Ti Opaque Mask Paste 5 ml Bonder Liquid Cement
$1,000.00
-
$69.99 $48.99
-
Mixing Wells 4 Spaces Palletes (DPLB12) X16 UNITS
Mixing Wells 4 Spaces Palletes
$5.00
-
LS-ZIR Polishing Kit (DPJT1452)
KIT 1452 contains all the necessary instruments for contouring, finishing, and polishing zirconium-reinforced lithium silicate restorations in the laboratory. Diamond instruments are used to finish supra-contact points, characterize occlusal and vestibular surfaces, and separate the crowns from the block. The green Diamond Stone is intended for rough grinding of the bonding contacts. In addition, the kit contains prepolishers and high-gloss polishers that provide high-gloss results and can be used without polishing paste. Items included:859LF.HP.018SD722F.HP.220 (DPJT722)ZIR9868M.HP.140 (DPJT9868M)ZIR9868F.HP.140 (DPJT9868F)9802G.HP.1709802F.HP.170
$100.00 $75.00
![Ti-Bonder Kit [FULL]](http://www.dentalplususa.com/cdn/shop/files/DPProductSquareImages_2.png?crop=center&height=645&v=1714684419&width=645)
![Ti-Bonder Kit [FULL]](http://www.dentalplususa.com/cdn/shop/files/23.jpg?crop=center&height=645&v=1714684427&width=645)
