› Specially developed for safe dry preparation of zirconiaROTATION SPEED› 15‘000 - 20‘000 rpm› max. 30‘000 rpm  

Read more less

› Specially developed for safe dry preparation of zirconia.ROTATION SPEED› 15‘000 - 20‘000 rpm› max. 30‘000 rpm

Read more less

Tungsten Carbide Bur HP HP2 wholesale, its ISO code is 500.104.001.001.010 Ball/Round Plain Cut head shape, head size diameter is 10mm, cutting length is 0.1mm. SPECIFICATIONS Cutting Length (mm)1 Head CutPlain Cut Head Diameter (1/10 mm)10 Head ShapeBall/Round ISO Number500.104.001.001.010 Shank Diameter(mm)2.35 Shank Type11-Straight Handpiece

Read more less

Tungsten Carbide Cutter G040FE wholesale, its ISO code is 500.104.257.140.040 Cross Cut Flame/Football head shape, head size diameter is 4mm, cutting length is 9mm, 514-Fine grit coarse. Check for more detail and wholesale price. SPECIFICATIONS ColorRed Cutting Length (mm)9 Grit514-Fine Head CutCross Cut Head Diameter (1/10 mm)40 Head ShapeFlame/Football ISO Number500.104.257.140.040 Shank Diameter(mm)2.35 Shank Type11-Straight Handpiece

Read more less

› Finest grinding / polishing of filling materials and all composite-filling-materials.ROTATION SPEED› 15‘000 - 20‘000 rpm› max. 30‘000 rpm

Read more less

Polishing Brush 2A with 79mm head size, thickness 2 layers, material is Black Bristle Hair, ideal for finish or polish plaster moulds, acrylic etc., check factory prices now. SPECIFICATIONS Head Diameter (1/10 mm)79 MaterialBlack Bristle Hair Thickness(1/10mm)2 layers Usagefinish or polish plaster moulds, acrylic etc.

Read more less

Tungsten Carbide Bur HP HP8 wholesale, its ISO code is 500.104.001.001.023 Ball/Round Plain Cut head shape, head size diameter is 23mm, cutting length is 0.23mm. SPECIFICATIONS Cutting Length (mm)2.3 Head CutPlain Cut Head Diameter (1/10 mm)23 Head ShapeBall/Round ISO Number500.104.001.001.023 Shank Diameter(mm)2.35 Shank Type11-Straight Handpiece

Read more less

› Finest grinding / polishing of filling materials and all composite-filling-materials.ROTATION SPEED› 15‘000 - 20‘000 rpm› max. 30‘000 rpm  

Read more less

Miniature Polishing Brush, with head size 19mm, material is Grey Pony hair, Wheel head shape. Ideal for polishing surface of all types of material soft and hard. SPECIFICATIONS Head Diameter (1/10 mm) 190 Head Shape Wheel Material Grey Pony hair Shank Diameter(mm) 2.35 Shank Type Straight Handpiece

Read more less

Tungsten Carbide Cutter G060CE wholesale, its ISO code is 500.104.257.190.060 Cross Cut Flame/Football head shape, head size diameter is 6mm, cutting length is 12mm, 524-Medium grit coarse. Check for more detail and wholesale price. SPECIFICATIONS Color Blue Cutting Length (mm) 12 Grit 524-Medium Head Cut Cross Cut Head Diameter (1/10 mm) 60 Head Shape Flame/Football ISO Number 500.104.257.190.060 Shank Diameter(mm) 2.35 Shank Type 11-Straight Handpiece

Read more less

› Specially developed for safe dry preparation of zirconiaROTATION SPEED› 15‘000 - 20‘000 rpm› max. 30‘000 rpm 

Read more less

Tungsten Carbide Cutter L040CE wholesale, its ISO code is 500.104.201.190.040 Cross Cut Needle head shape, head size diameter is 4mm, cutting length is 14mm, 524-Medium grit coarse. SPECIFICATIONS ColorBlue Cutting Length (mm)14 Grit524-Medium Head CutCross Cut Head Diameter (1/10 mm)40 Head ShapeNeedle ISO Number500.104.201.190.040 Shank Diameter(mm)2.35 Shank Type11-Straight Handpiece

Read more less

Miniature Polishing Brush, with head size 19mm, material is Grey Pony hair, Wheel head shape. Ideal for polishing surface of all types of material soft and hard. SPECIFICATIONS Head Diameter (1/10 mm) 190 Head Shape Wheel Material Grey Pony hair Shank Diameter(mm) 2.35 Shank Type Straight Handpiece

Read more less

Tungsten Carbide Cutter L040CN wholesale, its ISO code is 500.104.201.175.040 Plain Cut Needle head shape, head size diameter is 4mm, cutting length is 14mm, 524-Medium grit coarse. Check for more detail and wholesale price. SPECIFICATIONS ColorBlue Cutting Length (mm)14 Grit524-Medium Head CutPlain Cut Head Diameter (1/10 mm)40 Head ShapeNeedle ISO Number500.104.201.175.040 Shank Diameter(mm)2.35 Shank Type11-Straight Handpiece

Read more less

Polishing Brush with 58mm head size, thickness 2 layers, material is Black Bristle Hair, ideal for finish or polish plaster moulds, acrylic etc., check factory prices now. SPECIFICATIONSHead Diameter (1/10 mm) 58Material Black Bristle HairThickness(1/10mm) 2 layersUsage finish or polish plaster moulds, acrylic etc.

Read more less

Polishing Brush with 101.6mm head size, thickness 50mm, material is White Cotton Cloth, ideal for finish or polish plaster moulds and acrylic. SPECIFICATIONS Head Diameter (1/10 mm) 101.6 Material White Cotton Cloth Thickness(1/10mm) 50 Usage finish or polish plaster moulds, acrylic etc.  

Read more less

Diamond Bur HP Electroplated FK33 wholesale, Inverted Cone head shape, head size is 3.3mm, Red ring color, 514-Fine grit coarse. Head Diameter (1/10 mm): 33 Cutting Length (mm): 1.2 Head Shape: Inverted Cone Shank Type: HP Shank Shank Diameter(mm): 2.35 Grit: 514-Fine Color: Red

Read more less

Specially developed for safe dry preparation of ZirconiaROTATION SPEED› 15‘000 - 20‘000 rpm› max. 30‘000 rpm  

Read more less

• DLC coating using the latest coating technology.Significantly enhanced lifetime compared to conventional coatings. Smooth running.

Read more less

Polishing Brush with 80mm head size, thickness 4 layers, made of Black Bristle Hair, Assembled on polishing latch to finish or polish Plaster Moulds, Acrylic. SPECIFICATIONS Head Diameter (1/10 mm) 80 Material Black Bristle Hair Thickness(1/10mm) 4 layers Usagefinish or polish plaster moulds, acrylic etc.

Read more less

› Finest grinding / polishing of filling materials and all composite-filling-materials.ROTATION SPEED› 15‘000 - 20‘000 rpm› max. 30‘000 rpm

Read more less

Coarse-grained diamonds offer many advantages compared to their finer counterparts, but the increased heat generation they cause must be taken into consideration when using them. It is important that instruments used with these products have adequate cooling (e.g. a water spray) and that application force is limited to avoid further heating.

Read more less

› The use of coarse-grained diamonds (ISO 534, 544 and 554) can lead to increased heat generation. When using these products, } special care should therefore be taken to ensure sufficient cooling and minimal application force.› Instruments from ISO size 031 should be used with additional cooling (water spray)

Read more less

PRE-SINTERPOL is an innovative solution for the esthetics of pre-sintered zirconia. It does not change the color, while achieving a smooth and glossy surface finish. The combination of M-polishers and F-polishers provides an effective polishing result. The dark grey M-polishers remove connectors, thin margins, and make the surface smoother. The light grey F-polishers polish the surface of pre-sintered zirconia to give it a glossy finish. This combination of polishers is ideal for achieving an esthetic result with pre-sintered zirconia.

Read more less

Coarse-grained diamonds offer many advantages compared to their finer counterparts, but the increased heat generation they cause must be taken into consideration when using them. It is important that instruments used with these products have adequate cooling (e.g. a water spray) and that application force is limited to avoid further heating.

Read more less

LEARN MORE ABOUT G-CAM [CLICK HERE] The G-CAM laboratory polishing kit for an optimum finish.It consists of three steps: grinding, polishing, and brightening.  

Read more less

Diamond polisher, which can be optionally used as a preliminary polishing stage prior to using JOTA EASY to produce even more professional results.JOTA PROFESSIONAL BaseStep 1 - Green: contouring and smoothing 7‘000 – 10‘000 rpmJOTA EASYStep 2 - Grey: high-lustre polishing 3’000 – 8‘000 rpmItems: DPJT9828-JOTA PROFESSIONAL Base DPJT9832-JOTA EASY DPJT9833-JOTA EASY  

Read more less

Dentristy Zirconia diamonds with special diamond grit and optimized bond are designed for working on highly sensitive zirconia. By using mono-crystalline diamond grit, the instruments are less aggressive, and they ensure a low-temperature rise during preparation and keep the roughness of the prepared surfaces low. This significantly reduces the risk of micro-cracks in the zirconia.With the polishing system, we offer a solution that polishes corrections of zirconia restorations to a high gloss in a very short time. Smaller modifications to inlays/onlays or crowns often take place on the chairside, so efficient and effective polishing solutions are essential.Items: DPJT850 DPJT833 DPJT833F DPJT801 DPJT838L DPJT9861M DPJT9862M DPJT9861F DPJT9862F DPJT662   

Read more less

Flexible diamond disc fine 927 220 5,80 580,00ISO: 806 104 358 514 220Customs tariff no.: 9018.4900Dental bursL: 0,5D:020S:HPø 1/10 mm

Read more less

› Two-step diamond polishing system for material removal, smoothing and polishing of zirconium oxide.› Dark green: smoothing and pre-polishing

Read more less

Tungsten Carbide Bur HP HP63 wholesale, its ISO code is 500.104.107.006.023 Flat End Cylinder Cross Cut head shape, head size diameter is 23mm, cutting length is 0.5mm. SPECIFICATIONS Cutting Length (mm)5 Head CutCross Cut Head Diameter (1/10 mm)23 Head ShapeFlat End Cylinder ISO Number500.104.107.006.023 Shank Diameter(mm)2.35 Shank Type11-Straight Handpiece

Read more less

› Two-step diamond polishing system for material removal, smoothing and polishing of zirconium oxide.› Dark green: smoothing and pre-polishing

Read more less

› Two-step diamond polishing system for material removal, smoothing and polishing of zirconium oxide.› light green: gloss polishing.

Read more less

Defects such as cracks and microchips formed due to the manufacturing process or characterization of zirconia and Sintron can not be eliminated by subsequent sintering. We, therefore, recommend greenor white-stage polishing. The 1936 GREEN STATE REFINING KIT contains instruments for cutting from the block or blank, grinding the contact points, texturing the surfaces, and PRE-SINTERPOL polishers for green or white stage polishing.

Read more less

› Two-step diamond polishing system for material removal, smoothing and polishing of zirconium oxide.› light green: gloss polishing.

Read more less

Tungsten Carbide Bur HP HP38 wholesale, its ISO code is 500.104.010.001.016 Inverted Cone Plain Cut head shape, head size diameter is 16mm, cutting length is 0.16mm. SPECIFICATIONS Cutting Length (mm)1.6 Head CutPlain Cut Head Diameter (1/10 mm)16 Head ShapeInverted Cone ISO Number500.104.010.001.016 Shank Diameter(mm)2.35 Shank Type11-Straight Handpiece

Read more less