All Rotary Tools
-
Diamond polisher Green RA (DPJT 9828)
Diamond polisher, which can be optionally used as a preliminary polishing stage prior to using JOTA EASY to produce even more professional results.contouring and smoothing 7‘000 – 10‘000 rpm
-
Diamond Polisher Grey RA (DPJT9832)
Diamond polisher, which can be optionally used as a preliminary polishing stage prior to using JOTA EASY to produce even more professional results.JOTA EASYGrey: high-lustre polishing 3’000 – 8‘000 rpm
-
Diamond Polisher Grey RA (DPJT9833)
Diamond polisher, which can be optionally used as a preliminary polishing stage prior to using JOTA EASY to produce even more professional results.JOTA EASYGrey: high-lustre polishing 3’000 – 8‘000 rpm
-
Zirconia Diamond FG Z833 (DPJT833)
Zir Prep developed for processing zirconium oxide.Zir Cut developed for cutting zirconium oxide crowns.
-
Zirconia Diamond FG Z833F (DPJT833F)
Zir Prep developed for processing zirconium oxide.Zir Cut developed for cutting zirconium oxide crowns.
-
Zirconia Diamond FG Z801 (DPJT801)
Zir Prep developed for processing zirconium oxide.Zir Cut developed for cutting zirconium oxide crowns.
-
Zirconia Diamond FG Z838L (DPJT838L)
Zir Prep developed for processing zirconium oxide.Zir Cut developed for cutting zirconium oxide crowns.
-
Abrasive Zirconflex HP (DPJT652) X 2 Unit
Specially developed for safe dry preparation of zirconiaROTATION SPEED› 15‘000 – 20‘000 rpm› max. 30‘000 rpm
-
Carbide Burs X 5 Units (DPJT23SR)
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
-
Carbide Cutter x 1 Unit (DPJT251F)
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
-
Carbide cutter X1 Unit (DPJT488F) X 1 UNIT
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
-
Carbide cutter X1 Unit (DPJT77MF) X 1 UNIT
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
-
Carbide cutter X1 Unit (DPJT73MF)X 1 UNIT
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
-
Polishing Bur for G-cam (DPJT1171F) x 1 Unit
Surface sealing and mirror polishing for G-cam
-
Polishing Bur for G-cam(DPJT1163F) X 5 Units
Surface sealing and mirror polishing for G-cam
-
Diamond polisher D-GREEN HP (DPJT9867M) X2 UNITS
Two-stage diamond polishing system for material removal, smoothing and polishing of sintered zirconium oxide. Smoothing and pre-polishing / light green: high-gloss polishing.
-
Dental Diamond Bur (DPJT859LF) X5 UNIT
The use of coarse-grained diamonds (ISO 534, 544 and 554) can lead to increased heat generation. When using these products, } special care should therefore be taken to ensure sufficient cooling and minimal application force.Instruments from ISO size 031 should be used with additional cooling (water spray)
-
Dental Diamond Bur (DPJT859F) X5 UNIT
The use of coarse-grained diamonds (ISO 534, 544 and 554) can lead to increased heat generation. When using these products, } special care should therefore be taken to ensure sufficient cooling and minimal application force.Instruments from ISO size 031 should be used with additional cooling (water spray)
-
Carbide Cutter x 1 Unit (DPJT251) X 1 Unit
› Mainly for finer preparation of precious metals, non-precious metals, acrylics and porcelain.› Moderate, highly selective material removal, smooth workpiece surface.› Instruments with an M in the Match Code have a shorter working section to allow more detailed preparation
-
Separating Discs (X20pcs) DPCH54
disc fine 927 220 5,80 580,00ISO: 806 104 358 514 220Customs tariff no.: 9018.4900Dental bursL: 0,5D:020S:HPø 1/10 mm
-
STEEL HP (DPJT301) X5 Units
› These instruments should be conditioned using a rust protection spray to avoid the formation of black spots / margins or oxidation areas during preparation of non-stainless steel instruments in an autoclae / steam steriliser.
